RoboDoc

@FebrianFrancione I had this problem when I tried to run from my home directory instead of doing docker/run.sh first. Worked fine when I launched the docker and went to the...

J6 & J7 connectivity My original question was why there was a duplicate J7 connector at all. My understanding was to be able to connect to the Pi GPIO pins...

I like the DROK and the Adafruit breakout board. I rearranged my power sequence to: battery/wall wort > lighted push button > DROK > remote kill switch > PCB. This...

What if you just left one of the "front" vertical screws on the clamp out? The clamp would remain held by 3 screws while allowing the horizontal tightening screw to...

I, too, am hoping for an easier ARM64 installation! I'm going crazy trying to install a D455 on a Raspbetty Pi 4b under Ubuntu 20.04 64bit Server and ROS2. I've...

@MartyG-RealSense @andresgalaviz I second that!! The ARM community is a huge market that should be courted by Intel. Also especially the ROS and moreso the ROS2 community to provide nodes...

It appears that link is deprecated: "[deprecated] Feb 2021 Ubuntu 20.04 LTS is now natively supported by the RealSense™ SDK 2.0." and suggests "Have a look on https://github.com/IntelRealSense/lib..." Have a...

@grassjelly Thanks for the very prompt responses! Downloaded ok. Then `ubuntu@LINOROBOT:~$ bash install_linorobot2.bash 4wd realsense realsense` `Summary: 1 package finished [7.98s] EE === ./uros/micro-ROS-Agent (git) === Could not determine ref...

Any progress? Should I try again?

Running: RPi4B 8GB / Ubuntu 22.04 Jammy Jellyfish / ROS2 Humble Hawksbill trying to be sure I did all the correct steps I did: `ubuntu@LINOROBOT:~$ rm -rf ~/linorobot2_ws/src/micro_ros_setup/ ubuntu@LINOROBOT:~/linorobot2_ws$ rosdep...