J-Twin

> Connect to the UART console and show the complete log output during boot. Things are not looking good at all! System gets in a boot loop shortly after loading...

Is there a way to dig into this? SD card used to write the image file is in good condition. The same card was used to boot another noble image...

Hello, I have updated bootloader to v1.16 from v1.08 but problem remains. This bootloader along with friendlyelec U-Boot SPL are able to boot properly all Armbian SD images.

Hello, Not to forget, friendlyelec kernel is not having this problem with 6.1.57 that I tested some time ago: input: realtek,rt5616-codec Headphone Jack as /devices/platform/rt5616-sound/sound/card1/input3 Also this is the Armbian...

@ginkage Thanks for the reply. Wonder if this change will break any other device using Headphones entry