HendrikJan-5D
HendrikJan-5D
I have tested the latest version Marlin/9axis_pull. Compiling is no longer a problem. The W ( P ) endstop function is okay ( M119 ) The 9th axis can only...
Your latest update did not resolve the issue. G1 W20 + ------> 20 mm G1 W-20 +------> 40 mm totaal +----> 60 mm The dir function of the TMC2209 P...
I downloaded your latest version. And think you made a version mistake somewhere. I run into compiler errors that have already been fixed in an earlier version. ( 3 days...
In the first configured version 3 days ago, the 8th axis worked without any problems. Only the 9th axis had problems.
Latest version downloaded My pin files and configs copied over without changes. The dir problem with the 9th axis is not solved yet. The other 8 Axis work well G1...
When looking for a solution to the ( dir ) problem of the P Axis I came across the following things. Marlin > src > core > types.h 376 template...
Just a quick feedback. The 9th Axis works. Come back to it later, test more first We've fixed it.
For the X Y and Z Axis all standard codes work And can I print normally This is not yet possible for the other Axes. Because there is no universal...
I configured the 10th Axis. (The 10th Axis works after corrections ) See attached test report. And configured files Question For the cooling of drivers on the extension board M5....
((The AUTO_BED_LEVELING_3POINT code so that it automatically adjusts the rotational axes of the table.)) That would be nice . Because I now have to make sure that all axis are...