HelmiBeh

Prevent OLED from burn in

13

After some month of operation, some of the OLED shows burn in effects, if the same text is displayed with high brightness. To prevent this, it should be possible to...

Wrong config for 868/915MHz TTGOLoRA32 v2 board

1

Please change OLED_RST to 0 (unused). The original GPIO 16 is used for Flash_CS on the board and change L_RST to 23, as the SX1276 reset is connected to GPIO23....

Topic MQTT_USER and MQTT_PASS: change "You can ask for user and password in this Telegram group: https://t.me/joinchat/DmYSElZahiJGwHX6jCzB3Q" to: "You can ask @tinygs_personal_bot in this Telegram group: https://t.me/joinchat/DmYSElZahiJGwHX6jCzB3Q"

LoRa parameter programmable?

1

Great work, Roel! For me, it would be nice to set different LoRa parameters via HTTP-interface. E.g. spreading factor, bandwidth and so on. Could this be a feature for a...