MPR
Is there a way to get the signal strength (db/m) of a channel? This is where the power value is calculated as a average of the FCCH burst, right? https://github.com/steve-m/kalibrate-rtl/blob/master/src/c0_detect.cc#L111
We have the chance to use the location service of https://unwiredlabs.com/api My idea is to compare the cell area with the location of the phone. We can send a request...
The characteristic of a true "changing LAC" alert is, that the LAC value of **one** certain cell is changing once or maybe a few times in short intervals (1-10 minutes)....
This device is an extension to gather more information about the connection and the BTS in the area. 1. Try to use GR-GSM on an Android phone It will take...
A "Scan" (processes) is gathering data. With GNU Radio, tshark or other software components. The data is saved in so called collections in a MongoDB. A "Detection" is handling the...
Reading from 2 or more SDR simultaneously. Each SDR can run it's own (customized) scan. For example if you want to monitor one certain CellID, permanently listening for paging requests....
(if somebody is paging you, they are tracking your position.) This is done by sending your IMSI in a "Paging Request" message, as if there was a incoming call. Your...
Slider Menue for settings Add a button "configuration" to the frontend. Opens a slider when pressed. If possible read the data from the settings file. https://github.com/He3556/SDR-Detector/blob/master/example_settings.json Show the data on...
**Right now this value is constant for all scans.** See Settings: https://github.com/He3556/SDR-Detector/blob/master/example_settings.json#L13 ``` '"deepScanPeriod": 10' ``` But different scans need more or less time. P2: 5-10 seconds P3: at least...
Positive detections are not shown on the frontend. The Score is always 0 and color is green - even if there are detections.