Grubby0624

Excuse me, I understand that your commit(Change-Id: I13c558dc243ef4e3ea8658b6cb820d26c637c6a9) is the reason why OPAL cannot load OCC images: 1. Remove the rt_pnor module from RUNTIME-MODULES: src/makefile==>- RUNTIME-MODULES+=pnor_rt #~/src/usr/pnor/runtime/ 2. In loadLid(),...

Sorry, I made a mistake in my previous judgment. I checked that P9 should have cached the OCC image in "hb reserved memory", but P10 deleted the relevant logic in...

When I reduce the memory frequency to 2666MHz, this error will not be reported. I think this may be a signal integrity problem.

Excuse me? 1. Are there any suggestions for testing and improving the signal integrity of this DIMM 2. I remember how P9 can improve signal integrity by directly modifying registers...

Thanks for your reply. Our shmoo test on Rainier is currently in the process of trial. There are two more questions to confirm: 1. An error is reported at istep...

We find that the problem is due to the value of the following registers that the PRDF locates: EXPLR_ RDF_ FIR=0x8011C00 (its value is 0x000000809e0000000). I understand that this is...

This is the correct value: 0x00000809e0000000

1. The system can boot up to the OS with only this one DDIMM, but running HTX for a long time will report MCE, HTX will terminate, but the system...

1. MCE get reported when it crash，According to my understanding, if MCE occurs while running HTX mdt.mem, HTX should stop. 2. I modified the parameter values sent to OCMB in...

I tried to adjust the values of the following parameters: atxImpedance/atxSlewRate/cktxImpedance, and finally found the best ATX-0 eye width of 254ps. Afterwards, we made many modifications to the SI parameters,...