Great-Chart
Great-Chart
As of 10th May these now show up in OTA tab and devices receive update(s). Unsure if coincidental or a fix of some sort applied.
This can be activated through Z2M Settings, under Advanced options. Scroll down (some way) to locate. Mine is set to ISO_8601. See if this is what you're after here. Here's...
If you check Device Info you'll likely now have additional (initially hidden) entities that could add value for monitoring selected problem devices. I'm sure I came across this setting (last...
Or perhaps this one? https://www.zigbee2mqtt.io/devices/TS0044_1.html
I've found that if I short out (via screwdriver) the underside pins to trigger the alarm / wet (leaking) event(s); then once the short has been removed the device will...
There may be some clues from within #22076?
@Majestic7979 You might find what you are looking for here through Battery State Card via HACS. https://github.com/maxwroc/battery-state-card A number of Home Assistant YouTube video's cover this as a useful walkthrough...
I've noted similar traits (on 1.39.0 with same adapter and firmware version on x86 mini PC also); invariably a restart of Z2M (via Settings / Add-ons) will recover all unavailable...
I commented earlier to advise I was suffering somewhat random devices dropping offline / "crashes" etc; and also noted the response to revise coordinator firmware due to 20230507 being advised...
I've also experienced this issue and don't believe it is related to OTA updates. I have found that occasionally the Disabled checkbox would stay ticked long enough to scroll to...