GenerallyCovetous
GenerallyCovetous
Hi, I also met this problem when i run sdmgr model. "RuntimeError: roi_align_rotated_forward_impl: implementation for device xla:0 not found." Have you solve this bug yet?
Thanks, I notice that ROIAlign is supported on Ascend, but according to my bug message, it is complete opposite. Does this have something to do with the version of mmcv(mine:...
> The ops are integrated in mmcv. You should first check the version of mmcv and then find the corresponding mmocr version. Besides, the mmcv ops dev environment (CANN) is...
> #3002 thanks a lot. But my MMCV and MMOCR were successfully installed as normal, and there was no problem verifying them according to the official website process. However, I...
Pytorch version: 1.11.0 Torch_npu version: 1.11.0.post1.dev20230719 CANN version: 6.3.RC2
你好，我也遇到这个问题，同样的数据集精度在svtr上表现特别低，我猜测应该是配置文件有哪里没有设置对，请问你解决这个问题了吗
> 你好，这里指的是Paddle，报错是拉取Paddle的代码由于网络原因失败了。可以试一下手动把PaddleCustomDevice/Paddle更新到最新 你好，请问具体应该怎么操作呢，我无法git外网，在Paddle主仓下载了zip解压然后rename成Paddle放在了PaddleCustomDevice目录下还是不行
> 你好，需要把cmake中 > > https://github.com/PaddlePaddle/PaddleCustomDevice/blob/c08dbdc1a66e6f8a482b6671580365cccc1fcf29/cmake/paddle.cmake#L67 > > 这句话删掉，但是编译时也会拉取第三方库，需要手动替换成gitee的源； > 请问下你这里是有源码编译的需求吗？没有的话我可以编一个custom-npu给你 你好，我没有源码编译的需求，目前是希望能在NPU上运行paddlepaddle的layoutxlm(paddleocr)模型，如果您能给我一个custom-npu就最好了，我的硬件是NPU 910B3, CANN 8.0.RC2
> 我们现在只支持CANN 8.0.RC1，请问满足你的需求吗 你好，可以试一下。如果不行的话，相当于就算编译拉取第三方库成功，在我RC2的硬件上也会有问题对吗
> 我们现在只支持CANN 8.0.RC1，请问满足你的需求吗 您好，请问能编一个custom-npu给我吗，感谢！