GaelicThunder
GaelicThunder
Thanks for the super fast answer, sadly i already check those thread (i putted the link but i think it wasn't very clear) but with no help. I'll try searching...
Thanks again for the super fast answer, i tried all the pin you suggested (rebuilding while deleting the CMakeCache) but the only thing the screen is doing is staying black...
Thanks @james1236 and @poisonousfish for the tips. I did tried with DMA On and Off with every build, (wanted to test it a little before going to ask the community...
Hi @ozett, thanks for the answer, i re-tried the bus clock divisor from 4 to 30 for all the `DST7789VW , ST7789 and DWAVESHARE_ST7789VW_HAT` with and without DMA too but...
@ozett i tried with 2 different Zeros, also im able to make the library work with others screen with the same chip (im using always fresh/different installation)
Thanks @ozett, i'll try what you added! I tried the screen with the python library and it works well (works like advertised on the site) I did looked up at...
Im back @ozett , i'll be sincere, i couldn't really move the init sequence like you did cause i lack the experience. However i did some testing, like you did,...
@ozett Thanks either way for the help! I'll keep on trying!
Oh god, good job @antiero!!! I haven't had time lately to try anything (and i didn't even see your first post, im sorry!) Thanks for the explanation both @ozett and...
Hi @mmrein , mind to share how you got it work with the 5? Im trying so hard to make it build you don't even know