Gabriele Cano
Gabriele Cano
I changed the code to have a delay of about 2ms but the output is worse because it takes even more time to reach the expected value. I tried even...
The library unfortunately didn't have any way to check if new data was ready, so i had to modify the PCB in order to connect the INTerrupt pin of the...
I increased the ODR to 4kHz (not sure if it's too much or not) and it seems to have improven the results even more. Do you have still some other...
Yes, I already deleted that line, I forgot to mention that.
Thank you for your answer Ok, I put initBLE in the setup function just after Serial.begin, then moved NimBLEDevice::startAdvertising(); inside the loop right after IM THE MASTER println. But still...
Yes what you described works, the problem js that the master device doesn't receive back the message from the slave after pairing. You can see in the slave log I...
It seems it should be working according to this page https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/coexist.html I don't know what to try next