G4DDS

I have a plipbox v0.6 firmware on an A1200 kickstart 3.1. I have my own little "test" distribution based on workbench 3.1 containing just the plipbox drivers, roadshow etc. (basically...

> NOBURST also worked for me. Thanks guys for the info. > > When I reboot the machine I have to power off the plipbox to get it to reset...

I've only had my plipbox a couple of months so I assume it is a v3 (it came with firmware v0.6). Seems to work fine for me with the NOBURST...

@aotta just confirming its these two pins here: 

I've found where this issue was originally fixed https://github.com/hoglet67/RGBtoHDMI/issues/226#issuecomment-901586484

@IanSB Excellent. I'll test the fix when its ready.

  That's with the default settings as supplied in your zip. I did have a play with the H width setting but it just seemed to move the left...

Just tested the latest fix and it behaves as you said it would. A couple of points I noted: 1. FF OSD was set to OFF where the default is...

Screen captures with default SAM Coupe Full Width setting:    I think that's probably pretty close to how it should be.

@IanSB I've switched my setup to the 3:5 ratio as the 3:4 seems a little too stretched horizontally for my liking. Still nice to be able to swap it at...