FreifunkUFO

Results 9 issues of FreifunkUFO

when i tried to compile libremesh i failed with openwrt-trunk. the package "iputils-ping6" seems to be missing, so i got this error: `u@PC:~/git2/openwrt$ time make V=99` `WARNING: Makefile 'package/feeds/libremesh/lime-debug/Makefile' has...

OpenWrt snapshot

Lets rename the branches to the openwrt standard used names. there is no need for different treatment of lime-packages, it would confuse many people. the standard is: master-branch is for...

Upload an original uboot. even openwrt/lede on this device already: root@LEDE:~# cat /etc/openwrt_* DISTRIB_ID='LEDE' DISTRIB_RELEASE='SNAPSHOT' DISTRIB_REVISION='r5117-fbde9ac' DISTRIB_CODENAME='reboot' DISTRIB_TARGET='ar71xx/generic' DISTRIB_ARCH='mips_24kc' DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r5117-fbde9ac' DISTRIB_TAINTS='' r5117-fbde9ac root@LEDE:~# uname -a Linux LEDE...

already running openwrt on it (freifunk meshkit ..) ``` root@74-44-balkon:~# cat /tmp/sysinfo/* cpe210 TP-Link CPE210 v1.0 root@74-44-balkon:~# uname -a Linux 74-44-balkon 4.4.30 #0 Thu Nov 3 11:13:50 2016 mips GNU/Linux...

still gluon (openwrt) on it... ``` root@liliensteinstr-cpe510-no:~# cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "u-boot" mtd1: 00010000 00010000 "pation-table" mtd2: 00010000 00010000 "product-info" mtd3: 00180000 00010000 "kernel" mtd4:...

its already on gluon (openwrt) ``` root@test-cpe510-11s-9:/tmp# cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "u-boot" mtd1: 00010000 00010000 "partition-table" mtd2: 00010000 00010000 "product-info" mtd3: 001c0000 00010000 "kernel" mtd4:...

nothing goes except topology. the GET Parameters doesnt look very nice ($ in parametername), and are wrong interpreted. ($ vs. %24) and the info-page is refreshing too fast

freifunk gluon (a german mesh firmware, just like libremesh) is using batman-adv. sometimes on an wifi-vlan (only in leipzig, gadow, altmark), but mostly without vlan. to have a libremesh network-profile...

Wenn Freifunk Nodes eine Funk- oder Kabelverbindung zu anderen Nodes haben, sollten die auch in der Karte angezeigt werden.