Frans412

The program in which this sensor is used keeps crashing. In a small test setup, I removed various connections one by one several times, including the pullup resistor. The program...

Dear Rob, Thanks for your reply. To start with I use an Arduino nano V3. Parasite power supply: no (three-wire) Precision: 12 bits Use normal cable. 1 meter long. Pullup...

Hello Rob, Thanks again for your response. The nanos are supplied with 5V on the 5V pin via a voltage regulator from 12 volts from the connection / data cable....

Hello Rob, I have included 2 attachments. IMG_5247 is with pullup of 4k7, IMG_5249 is with pullup of 2k2. The flanks of the scope are a bit steeper with a...

Hello Rob, I keep getting an error message that our emails are not being sent properly. I received a message from Google that they will try for another 45 hours,...

Hello Rob, I don't know what is going on that blocks the transfer of JPG, both local and attached. I will send the result in plain text to the email....

Tekst printing is: DALLAS 18B20 2331C4 +807AB Liking a good one. ??!! Op ma 29 jan 2024 om 22:19 schreef Rob Tillaart ***@***.***>: > It looks like the sensor is...

Timing.ino. Op di 30 jan 2024 om 09:30 schreef Rob Tillaart ***@***.***>: > And the sketch running is ????? > > — > Reply to this email directly, view it...