FelisucoVFR

Hi, I am using the R3 as a dual switch and I am getting the same lack of status update. I have checked that disconnecting LAN mode inside the eWeLink...

DW2 only supports “easy” SSID passwords. Only regular characters and numbers.

Ahh, ok. So it is paired already. Give me some time and I will tell you how I did and how I made it holding the state even after a...

@FairozJaf  Here it is how I could find it. Not hard but at the begining I was just doing the search at entity column. Once you have this solved,...

at Configuration.yaml: `# Garaje DW2 WIFI Door sensor data - platform: template sensors: door_open_garaje: friendly_name: Puerta Garaje raw-don't use this value_template: "{{ states('binary_sensor.sonoff_10010xxxxx') }}" # Hay una parte para mantener...

eWeLink cloud was down, yes. It seems today is back and all works again

I had the same issue a few times with different integrations. iPhone 13 I need to reboot, close the app and forget it for a day or two to be...

I am actually using the custom:config-template-card There I set the max and min: variables: MAX_Limit: (states['sensor.my_pvpc_max_price'].state) - (-states['input_number.max_limit'].state) MIN_Limit: (states['sensor.my_pvpc_min_price'].state) - (states['input_number.min_limit'].state) And set later as follow: min: ${MIN_Limit} max:...

Thanks for answering. What is that module you say? The Tx came (from factory) with a BT module installed as indicated in the manual and advertisements. I opened the back...

Thanks. Yes that is what I understood and have seen in several X9D videos, but I just have “Enabled” as seen in the picture above or “- - -“. If...