Geoffrey Merck
Geoffrey Merck
A '\0' char is inserted into p->message while looking for message number; The purpose is unclear as none of the code seem to require it. This shall fix #406 and...
APRX does not pass posit packet when gating a message to RF. IGate rules state that along messages a courtesy posit shall also be agted to RF. When no t/pm...
This addresses issue #428. - Filters like t/o would not work on 3rd Party packets since the payload was not inspected. - Also budlist filter was applied on the outgoing...
It seems Filters are not inspecting third party packets when digipeating RF to RF We have a nearby igate which sends objects from RF to IS with 2 hops. I...
This addresses https://github.com/dl5di/OpenDV/issues/129
Hi, This adds a simple UDP Hole punching/NAT Traversal mechanism to enable G2 (Call Sign Routing) for gateways running with non public IP, typically mobile networks. I have recently read...
ircDDBGateway stops working when connected to a DExtra reflector and than gets connected to a DPLus reflector. ##### Detailed repro 1. Connected the gateway to a DPlus reflector through radio...
**Describe the bug** Digipeater is truncating path **To Reproduce** Steps to reproduce the behavior: 1. Setup the igate 2. Send a frame with more than one station e.g. F1ABC>APRS,DIGI1*,WIDE1-1 3....
Still unsure what was the idea behind not generating data when power is 0. However it makes calculation on the data unnecessary complex in PromQL. Here is an attempt to...
I have installed 3kW of solar panels. As a matter of fact, the "PowerUsed is sometime 0 when the panels produce enough energy to provide my home. During the times...