Emmanuel-DUFOUR
Emmanuel-DUFOUR
> you want to use a BluePill, wire everything according to the "BluePill Adapter" published on stm32duino Forum. Do you have a link to the adapter wiring ? I cant...
Thanks alot, the display (2.4" tft) works but not the touchscreen yet, with the adafruit touchscreen library, the usual mapping for the UNO is as follow: const int XP =...
EDIT: im using the TouchScreen_STM.h library
@david > > ``` > Port data |D7 |D6 |D5 |D4 |D3 |D2 |D1 |D0 | > Pin stm32 |PA7|PA6|PA5|PA4|PA3|PA2|PA1|PA0| > > Control pins |RD |WR |RS |CS |RST| >...
@rtek1000 in the mcufriend_shield.h I modified: ``` #elif defined(ARDUINO_GENERIC_STM32F103C) || defined(ARDUINO_NUCLEO_F103C8) || defined(ARDUINO_BLUEPILL_F103C8) #warning Uno Shield on BLUEPILL #define RD_PORT GPIOB //#define RD_PIN 5 #define RD_PIN 0 //hardware mod to...
If I change XM& YP into analog pins then I have to change the #define WR_PORT #define CD_PORT in the mcufriend_shield.h header too right ?
> > > No. Connect the BluePill with the standard wiring. > > When you use the Touchscreen you add the two lines that specify your pins and calibration. >...
> Please identify the X and Y with a DMM or Uno. > If you don't have a Uno, Megaa, ... say so. > If you don't have a DMM,...
Hi Dave, it seems to work, it would help if you could release the blue pill compatible calibration software