EmileSpecialProducts

This is the Filezilla that i use 

Just use the ESP32-S3 / S2 as this has native USB. I have made a [fork](https://github.com/EmileSpecialProducts/UltraWiFiDuck) that also has a Web Programming so you will not even need a IDE...

This is linked to the [#375](https://github.com/esphome/esp-web-tools/issues/375) and [esptool-js ](https://github.com/espressif/esptool-js/issues/135) issue. I have same problem that the 10.0.1 will not work on the WEMOS LOLIN S2. But will work on the...

>However with my Wemos Lolin S2 mini ESP32-S2 board on version 8.0.6 it simply says that your ESP32-S2 board is not supported You can test the S2 board upload using...

[damz](https://github.com/damz) This [issue](https://github.com/espressif/esptool-js/issues/161#issuecomment-2524996331) is worked on by the ESPTool-JS team. And is resoved, but a release still has to be made. Then the ESP-Web-tool can be upgraded.

It looks like it is resolved in the 10.1.1 release version. You can test it using this [link](https://emilespecialproducts.github.io/UltraWiFiDuck/upload.html)

You can have a look what was done on the [https://tasmota.github.io/install/](https://tasmota.github.io/install/)

It looks like this is resolved from 10.1.1 release. I have tested it on my [UltraWiFiDuck](https://emilespecialproducts.github.io/UltraWiFiDuck/upload.html) This is a KeyStroke injection tool [github](https://github.com/EmileSpecialProducts/UltraWiFiDuck) There is also a PIO [script](https://github.com/EmileSpecialProducts/UltraWiFiDuck/blob/master/Scripts/extra_script.py) that...

The good thing about this project you do not need custom PCB. Just use the development bords ( I recommend esp32-s3 devkitc 1) , no SD Card needed for the...

Remove the device from the PC, and Add the device, this will help sometimes.