Brian Schmalz
Brian Schmalz
I started with a fresh RetroPi v4.5 install on SD card. Using Raspberry Pi 3 B+ and ControlBlock v1.6 board. After booting the system for the first time, (and letting...
When using TeraTerm to send long strings of commands all at once, the EBB will get confused, incorrectly interpret commands (generating errors in parsing), and get into a loop where...
Currently (2.8.1) the EBB firmware PO command is executed immediately whenever it is processed by the EBB. This may be in the middle of an already executing motion command (like...
As of v2.8.1 of the EBB firmware, the LT command is not happy (and will produce undefined behavior) if the parameters are picked such that the value (i.e. the time...
Including things like being able to manually select a COM port, being able to manually select a EBB firmware HEX file, and being able to skip the COM port stuff...
With the current (v2.6.3) EBB firmware a press on the PRG button (or RB0 going low, if that feature is turned on) will 'pause' the current plot because the PC...
As per issue #83, it would be really cool if you could have multiple instances of Inkscape open, and have the each print to a different EggBot, choosing which EggBot...
It would be so so so nice to have a single app that a user could download and run, on Win, Mac and Linux, that would do the following: 0)...
When running the BB version of RoboPaint RT for a demo at a gradeschool recently, I really wished for that "maximize" button on the RoboPaint RT window to be functional!...