Eldho K K
Eldho K K
Hey, sorry for the late reply. Even i couldn't solve this issue. If you're only looking to enable the driver you can follow this documentation. https://wiki.seeedstudio.com/reComputer_Industrial_J40_J30_Hardware_Interfaces_Usage/#usage
> ks0108 Hey, did you find a solution for this because currently i'm working on it and it shows error
Hi @amarKPIT did you solve this issue?
Thanks for the reply @Caveman8080 how long did it take to crack any HDD and what is the success rate?
Update: I enable ble endpoint logs and i could see it getting stuck at `[BLE] NO SEND: Gatt op in flight` what could be the potential cause for this? ```...
closing this as it is a duplicate of [37359](https://github.com/project-chip/connectedhomeip/issues/37359) i'm using bluez 5.78
Update: I tried connecting with Jetson AGX and it is initializing with `tegra-xusb` ``` 05:10:21 nvidia-desktop kernel: usb 1-2: new high-speed USB device number 2 using tegra-xusb 05:10:21 nvidia-desktop kernel:...
Hi @pelwell, I'm using the official rasberry pi adapter with rating 5.1V, 3A [Link](https://robu.in/product/official-usb-type-c-15-3w-power-supply-for-raspberry-pi-4/?gad_source=1&gclid=CjwKCAjw65-zBhBkEiwAjrqRMMKmrDIyov9Nut1dQvzuJ749v1mnPV--AnmjJEt04SMNQbYGn1RJ3RoCABQQAvD_BwE). I had the same doubt regrading the power issues so i disconnected all the other connection...
Sure i'll try with USB hub and let you know the results
Hello @pelwell, I tried with [this](https://zebronics.com/products/zeb-100hb) USB hub without and with external power of 5V/3A still the issue persists.