Davide Scano

Hi linhil, The nodeID in the switch should be 0 or 1, I think that is a design choiche is defined in the P4 standard. You can change the deviceID...

Didn't know why was empty, now should be ok.

Hi I did not experience this bug, but I notice that you use SDE 9.2.0 and it seems not supported by the latest stratum version https://github.com/stratum/stratum/releases.

Hi tisasi, 1) you have to connect a packet generator to the switch, e.i a device, and send traffic. 2)Once you "discover" your tofino switch with netcfg json file you...

Hi tisasi, you should load the proper chassis configuration file https://github.com/stratum/stratum/tree/main/stratum/hal/config. Basically when you run stratum it enables all the port defined in the json file. Best Davide

You can try the "bfrt commands" related to de ports direcly in the shell where you are running stratum and you can see the status of the ports there.

You can try also to connect 2 interfaces of the same switch. In this way you are 100% sure to avoid compatibility/configuration issues. Due to pluggable compatibility,port speed, etc

Hi tisasi, the answer is there: ``` 3)https://opennetworking.org/2022-p4-workshop-gated/ here you can find 3 video tutorial for undestanding how you can set flow rules etc in the switch. The tutorial is...

Hi @tisasi001, which is the output in onos? the lldp flow rule is installed? From my point of yoiew seems and errore related to the traslation p4_runtime message packet_in/packet_out, more...

Could be that the lldp is not supported (https://docs.sd-fabric.org/master/release/1.1.0.html) you should ask to more expert people. Sorry tisasi001