DrSchottky
DrSchottky
> Nexmon now officially supports Raspberry Pi Zero 2 W (see [seemoo-lab/nexmon#514](https://github.com/seemoo-lab/nexmon/pull/514)). > > Does this mean that it will be possible to fully support PwnP1 A.L.O.A on RPI Zero...
@Stewart8 thank you for your patch, it works on my weak mfc! I made a patched fork that can handle up to 33M candidates without segfaulting (never crashed during my...
@Stewart8 I replied by mail.
Usually mobile devices haven't a public IP but are behind a NAT
Did you run `source setup_env.sh` before that?
Try this workaround (for kernel 5.15) - Replace nexmon/patches/driver/brcmfmac_5.15.y-nexmon/cfg80211.c with this https://gist.github.com/DrSchottky/809d0eca857895d41224a6de73fded30 - Recompile and reload the driver - Do not create a mon0 vif ( iw phy etc etc)...
I committed a change that should fix it. @matthiasseemoo is it possible to merge this? https://github.com/seemoo-lab/nexmon/pull/530
Does it also happen with 7.45.154?
Never had heat problems, but try to repeat the tests with a heatsink and a proper PSU. What do you mean with warm reboot? A system reboot shoud power-cycle the...
Are you sure that's a heat issue? I mean: have you tried cooling it down somehow to confirm it dosen't happen if kept cold? Have you got a minmal setup...