John Maton

I am having the same issue after updating to the latest release. If I disconnect the [powered] USB3 hub and boot and then connect the hub, I can see the...

> @DrJohnM61 do you know what firmware/kernel you were on previously? > Does force_turbo=1 help? > Does switching to firmware from [here](https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=262649&start=100#p1610257) help? IIRC the prior version was the 5th...

> @DrJohnM61 do you know what firmware/kernel you were on previously? > Does force_turbo=1 help? > Does switching to firmware from [here](https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=262649&start=100#p1610257) help? I copied the files that your link...

> > CPU/GPU is not overclocked > > Maybe your Power supply isnt giving you enough power then The hub is powered, so there is 'no' drain for the external...

Latests tests... Updated back to 4.19.97-v7l+ with swapped out power supply. Same issues - Hard disks are not mounted (for any length of time) with a xHCI host controller not...

Thank you for the quick response and consideration. As a fyi, there is the GivTCP integration that exposes all of the givenergy inverter information/controls (https://github.com/britkat1980/giv_tcp)

MQTT. I just followed the process as written in this tutorial https://www.speaktothegeek.co.uk/2022/12/givtcp-v2-givenergy-and-home-assistant-with-solar-forecast-automation/#overview

Thank you. I will take a look when I am back from Canada.

I further changed the apps yaml file to have a different value (8000), but still the value kept on resetting to 5000. I suspected that it was something else that...

I also see this issue. Oddly, the log file shows that the `2025-11-01 13:11:45.371771: Rate array import [{'start': 790, 'end': 1410, 'rate': 'expensive', 'range': '(29.8p)'}, {'start': 1410, 'end': 1770, 'rate':...