Darkstar77

I designed and printed a tiny spacer for my carriage, which makes the endcaps flush with the rest of the carriage. So far, new centre is installed and tensioned, and...

> @jjfs127 I had been meaning to setup my personal repo, so here you go: https://github.com/Darkstar77/Voron/blob/main/2.4/stls/TAP-LDO_MGN12H_Spacer.stl It's challenging to print. 0.1 on the first layer, and 0.1 layers. I had...

@nedi89 > I‘m having the same problem. Vivedino carriage. I’ll try to see if it works with spacer but I hope voron team comes up with an official solution. You...

Welp, after about 30 hours of printing with the spacer in place, I am back to square one, because my belts are slipping again. I got through a bunch of...

@jjfs127 I tried your part, it failed on the first print, same deal. I see what you did though, and how you did it. Extruding the faces on top of...

@jjfs127 here is the difference between the original R6, and what I've done. https://github.com/Darkstar77/Voron/raw/main/TAP/OriginalCentreNewCentre.png

@x-c-dog-x I totally understand the frustration. I've got 2 versions I've modified, one of which is about 30 hours into printing now, and has been working. It is stressed a...

@nedi89 were the teeth damaged where the belt slipped? I'm beginning to suspect that the only way to really fix this is going to be to make it thicker by...

> @Darkstar77 any update on your v2 design? I'm running an LDO Trident with Klicky PCB and I'm thinking of migrating to Tap. I could switch out my rail to...

> V8 is out now which fixes this problem (as does cnc tap) Looked it over, and yes, that is similar to the direction I was going in to try...