DIY techie

No installation instructions for Home Assistant?

3

I’ve been using your great tool with Node-RED for a while, but after recently moving from Raspbian to Hassio (HassOS), I don’t know how to install it? I still want...

Change how cec-mqtt-bridge advertises itself. E.g. Playback 3 instead of Recorder 1

2

Hi :) Thanks again for making this great tool. How do I change how the cec-mqtt-bridge advertises itself? e.g. Playback 3 (9) instead of Recorder 1 (1) or as Unregistered...

Would be useful for everyone running their services in containers...

added deCONZ to stack and deCONZ node to Node-RED

5

Add deCONZ docker image from https://github.com/marthoc/docker-deconz Tested with raspberry pi 3B+ with Conbee II, Node-RED (including node-red-contrib-deconz) and Home Assistant. Hardware (Conbee I/II or Rasbee) must be plugged in when...

Home Assistant container uses too much memory (RAM)

2

Thank you for making IOTstack! By far the easiest way to get started with docker. Unfortunately, when I install Home Assistant from the IOTstack menu, I can only run very...

Node-RED loses connection with GPIOD after two “deploys” (frequent docker restart necessary) :(

17

### What are the steps to reproduce? Run node-red in the official docker container. Verify that the gpiod nodes have connection to the gpiod (daemon). ![Skærmbillede 2020-02-09 kl 23 14...

Missing Shortcuts integration

1

Thank you for making this app. Please integrate with iOS Shortcuts! It would be the ideal way of controlling a smart home! iOS Shortcuts are great because you can launch...

Please add support for blinds

1

Blinds have been added to this homebridge plugin, but I'd prefer to configure and control the blinds from inside node red: https://github.com/meg768/homebridge-ikea-tradfri-gateway

In Home Assistant I can send raw commands via hdmi_cec.send_command  But I cannot receive any raw commands. I tried using hdmi_cec.cec_command_received and hdmi_cec.cec_keypress_received, but to they are not active...

Added "HDMI-CEC to MQTT bridge" to stack

1

Very useful service. Works great with Node-RED.