Crafto Hohenvels

I am having the same problem

@stklcode sorry for disturbing you, but you mentioned you are operating a AMP, so am I. May I ask whether you are printing via the SD-Card or USB? And may...

Thanks a lot for the quick response! I will give 1.5.1 a try and maybe one of the development versions - maybe I can get something to work

Yeah, I pressed "Load Firmware Defaults" (if that is what you mean), then hit reload and save and reload

Update after re-doing the installation (for the third time with this firmware / first time with the 1.5.1) with the version 1.5.1 it works! At least on a very small...

The output looked fine as far as I could tell, but on the other hand I didn't save the logs. If it helps I could however upgrade the version and...

Update: I tried to print a Benchy on the 1.5.1... Didn't go well `Send: N4355 M486 S0*93 Recv: echo:Unknown command: "M486 S0"` this snippet seems related... gcode: [Benchy.zip](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/files/14654183/Benchy.zip) (Hopefully) the...

~~One thought upon looking up the command~~ ~~`M486` (https://marlinfw.org/docs/gcode/M486.html)~~ ~~This OctoPrint Plugin may be related, although it worked with the original firmware~~  The Slicer (Super Slicer) seems to add...

Update on the Update: The print still fails at the same point, now I found this error: `Send: N133 M73 P1 R89*36 Recv: echo:Unknown command: "M73 P1 R89"` again the...

Update on the Update on the Update: I found no more errors, so I am at a dead end... gcode: [Benchy.zip](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/files/14654845/Benchy.zip) Serial log: [serial (1).log](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/files/14654838/serial.1.log)