Cossid

For a non-engine change, you can use multiple masterserver cvars, but this will be dependent on having hosts specific to the protocol you need. dpmaster.deathmask.net (bound to both ipv4 and...

CBU can currently be utilized using the generic BK7231N board `generic-bk7231n-qfn32-tuya`

@rickyelopez many less common modules have not been reviewed yet, and need adjustments to defines where platform separation is needed. In most cases, you can change `#ifdef USE_ESP32` to `#if...

The web server in general seems to be working great, but the web OTA appears to be problematic still. It appears to be running into memory/buffer issues where it will...

It's not just you. I have this same device, and I can't seem to get it to finish the exploit OTA either. Battery powered devices with power saving features seem...

`Connection activation failed: 802.1X supplicant took too long to authenticate.` is just a general network timeout, and sometimes that's because the system has a scan from before the device was...

That log is for a light, there is no way that would work on a plug. You haven't yet verified you have a Beken device, so I'd start at https://github.com/tuya-cloudcutter/tuya-cloudcutter/wiki/FAQ#im-not-sure-what-module-is-in-my-device-how-do-i-find-out

These devices likely have different modules than the existing profiles. You can try by firmware version / name. For the plug, try 1.1.8 oem_bk7231s_rnd_switch instead. You haven't mentioned which firmware...

Your device is having issues finishing the DHCP request in time and gets stuck. You can restart the network join process; https://github.com/tuya-cloudcutter/tuya-cloudcutter/wiki/FAQ#my-device-gets-stuck-after-dhcp-what-can-i-do

> After I have cut it off, it still works with the Tuya fw, thus I have to use kind of LocalTuya integration in HA right? Yes, you would use...