ClemensGruber

IotWebConf on demand as configuration tool

4

My use case is a bit different than the scenarios descibed at https://github.com/prampec/IotWebConf#use-cases so perhaps someone can say if it is possible with IotWebConf or give some hints how to...

example code save and load custom parameters to EEPROM

1

Is there basic example how to save and load custom parameters to EEPROM along with the Wifi credentials? I got it working that the custom fields show up in the...

Some T-Call-SIM800C do not work below 3.9 V LiPo voltage

23

I have around 30 T-Calls here and after #165 I am a bit upset to face the next problem with this unstable T-Call boards! Some boards can not establish a...

deep sleep current below 500 uA? T-Call SIM800C AXP

1

There is a [nice documentation ](https://github.com/Xinyuan-LilyGO/LilyGo-T-Call-SIM800/blob/master/image/SIM800L_AXP192_SLEEP.jpg) of the **500 uA deep sleep current** for the (new) **T-Call with SIM800C with AXP192**. I wonder is this the lowest limit, or can...

Add MCU_DEVICE to presets-example.mk

3

In case you update the PyCom firmware via the sandbox tool and `make install-pycom-firmware` you have to specify `MCU_DEVICE` > [ADVICE] Please adjust the "MCU_DEVICE" environment variable like > export...

add hatched ground as ground fill option

6

Some applications, e.g. touch buttons, require hatched ground instead of plain ground, but this is currently in Fritzing only possible as a [complex workaround](https://forum.fritzing.org/t/how-can-i-add-hatch-fill-for-a-project/258/4) editing the SVG and replacing the...