CiNcH83
CiNcH83
What's the original hostapd.conf? I still believe the USB to be the bottleneck in terms of bandwidth...
OK, found original hostapd.conf: ``` # Basic configuration interface=wlan0 ssid=AutoBox-582f #bridge=br0 # WPA and WPA2 configuration macaddr_acl=0 auth_algs=3 ignore_broadcast_ssid=0 wpa=3 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #device_type=6-0050F204-1 # Hardware configuration #wmm_enabled=1 #wmm_ac_bk_cwmin=4...
Just some additional info on 802.11n vs. 802.11ac. On the Carlinkit/CPLAY2air dongles, we have a 2x2 antenna configuration. On 40MHz wide channels, this means up to 300mbps on N and...
> Security is also that we should be able to modify by using WPA2-AES instead of WPA. The given configuration supports both, WPA(TKIP) and WPA2(CCMP-AES). All CarPlay enabled iPhones connect...
I am not on a custom FW. I am just familiar with Wi-Fi and hostapd. Replacing hostapd.conf shouldn't be much of a problem though when using custom FW. It can...
> @CiNcH83 can you look over the following and check if it looks good to you? Here are some changes and additions from my side: ``` # WPA2 only auth_algs=1...
It looks like Realtek isn't really a good choice for a Linux AP, see [here](https://github.com/pritambaral/hostapd-rtl871xdrv). hostapd-rtl871xdrv seems to be really old sh** which probably doesn't allow for AC/VHT. That's probably...
I just realized that they are trying to enable 802.11ac and WMM for BCM4354 based models: ``` # Basic configuration interface=wlan0 ssid=AutoBox-582f # WPA and WPA2 configuration macaddr_acl=0 auth_algs=3 ignore_broadcast_ssid=0...
**(4)** > What version of the addon made the backup causing this issue? `19.0-RC1 (18.9.910) Git:20210119-8c761c4708` I however don't think that this is the version where this issue originates from...
The above backup of `19.0-RC1 (18.9.910) Git:20210119-8c761c4708` has been created with Backup 1.6.4. I remeber having upgraded to some version 1.5 when transitioning from Krypton to Leia for compatibility reason....