Christoph Franzen

The latter (setting web quota to 7, and mail quota to 3, if user has "bought" 10 in total) isn't a particularly good idea, I think. This only works, properly,...

Fine, works now as expected. I had installed via git anyway, so I can test now almost immediately.

The following might be related, because it's about "magically summoned" runners as well. To test something I hired 3 runners for a trivial job in the docks. I completed the...

Actually it **is** possible to add and remove menu entries entirely. This works correctly in the PDA's top menu where "Job's done." appears whenever you have completed a run, but...

My previous comment wasn't accurate. The location actually **_is_** the place where you left your fellow runners in the physical world, only the lighting is removed (black darkness), and there...

I still see the same in 19.07.10 r11427-9ce6aa9d8d on an RB2011iLS with 2 built-in switches. However, I had no success yet creating a working configuration manually after Luci screwed it...

Thank you for the answer, in the meantime I figured out the same by experimentation. (Multiple VLAN numbers can have the same IDs, as it seems, but not vice versa....

This is what Luci shows for the configuration above (of course only the "Luci label" is actually displayed): **Format:** _switch#: uci port #=Luci label=label on box case | …_ _vlan...

For now, I've documented the switches as accurate as I could on the [Wiki page](https://openwrt.org/toh/mikrotik/rb2011#network_ports_switch_configuration) , but I consider that to be a workaround until above mentioned problems are fixed....

Hello, for this special case I can confirm the console workaround is indeed working, but there's missing some information in the previous posts: The folder must pre-exist, the console command...