Christoph

Hi, I've set up the RS458-2 to "SolarEdge Device" But I will try to provide a Screenshot from my inverter Settings later today

Hi, sorry - due to late shift I was not able to get the data from the inverter to show my settings :-( If you login to your inverter with...

I am pretty sure, that this issue is not related with the integration itself. Most probably it is something with your modbus settings on the inverter. It might be, that...

The First Connection rs458-1 seems to be OK, thus is the Connection to the Meter. The important Connection for the Integration should be the rs458-2. As far as I got...

Hi, how does your second battery communicate with the inverter? SolarEdge does only allow one active modbus connection. So in theory, I would expect that the second battery might use...

Since I don't use any WiFi Communication Setup, I can't really give any advice here. But usually, the TCP Interface of the Inverter (doesn't matter if it is wired or...

Probably, you don't need to change something on your Inverter.... But I don't have Batteries and I don't know your setup - so I can't really give any advice here....

Hi, there's an option on how to establish multiple connections via Modbus :) I recently found this, because my wallbox also required a modbus connection to the inverter. There's an...

I don't know, if this could work if you are running two inverters. I think, that strongly depends on how these inverters are connected. https://www.solaredge.com/sites/default/files/solaredge-communication_options_application_note_v2_250_and_above.pdf

have you checked if your entities are enabled in the entity secion of the integration?