Chris Fredriksson

Hello Hagaigold, Thank you for the response! I'm really sorry I haven't replied yet, I could come up with several reasons, but I'm sure you're not interested ;) I can...

Hey **jkroeze**, Sorry, I haven't actually! **hagaigold** did write a nice guide, but I've just pushed this one away for some bit to get some distance.. even though I don't...

Hey **jkroeze**, Alright, so the modified files, the spi.c and spi.h are from the Controllino files that are/should be included alongside the Controllino library - when you click include library->Controllino?...

Hey again, Finally got some time to test and try to figure out how this is supposed to work :) Using the Arduino IDE, I can install the library/board thingies...

Progress! Well.. not thanks to me I guess.. but I've noticed a difference! I've got both the Atmel Studio compilation to get network access now with IP 192.168.1.128 when gateway...

More progression! Starting to become a long monologue here ;) I found that if I remove this part in file spi.c, from your file jkroeze ``` RTC_PORT |= _BV(RTC_SS); /**...

An update on the previous, just to show the TFTP communication This is with the per1234 version of the Ariadne Bootloader, shouldn't there be something else after the part with...

> No, the messages you see are from your tftp client. Ariadne doesn't sent anything back except for errors, so you shouldn't see anything other than that. Alright, at least...

Thanks for coming here and replying as well per1234! :) Both the per1234 and the loathingKernel version is compiled in Atmel Studio 7, burned with an Atmel ICE through AS7....

I haven't really understood the comparing thingies yet, still working on that :) I think I just need some time to get used to it. However, I've changed the serial.c/.h...