CapitaineBidouille

> What kind of power supply are you using to power the hub? Is it a phone charger? Don't use those, they often create under voltage issues. I am using...

Here is the result of my First try : USB3 Port1 : Powered Hub : 3x 5TB hard drives + USB Ethernet USB3 Port2 : USB3 Extension cord connected to...

So, I am testing right now with that setup : USB3 Port1 : Powered Hub : 3x 5TB hard drives + USB Ethernet USB3 Port2 : USB3 Extension cord connected...

 Let's transfer a huge virtual machine and see what happen. Performance is very good in 5Ghz, from around 300Mbps to 500Mbps. After some time copying it seems to stay...

 It went from start to finish with perfect stability. At the left, I was pinging Google to see if I was timeouting. I could browse social networks and youtube...

> The QC phone charger you have may not be outputting enough stable power for your purposes. Even though it says 18W, that's in QC mode which requires a negotiation...

> @CapitaineBidouille > > You did say HDD and I should have asked you to clarify. Are those HDD's spinning rust drives? If so, oh my. Those things can pull...

> Looks like both are installed on my PI. My NFtables does not have any rules. Here is a result of iptables -S : -P INPUT ACCEPT -P FORWARD ACCEPT...

I installed iperf3 server on the PI and the client on my Windows machine. What commands should I use to start a good stress test that could give me logs...

iperf3 is definitely an highly valuable software. Could timeout my wifi network in < than 5 minutes. So that setup still does not work. ```Connecting to host 192.168.4.1, port 5201...