Jean-Marc Ulrich
Jean-Marc Ulrich
> So for me the last bootloader solves the problem. I have the tools to program the flash and the cam open, but I am not able to compile this....
> This is link where you can download the bootloader I built (8th of May 2020) > > https://www.icloud.com/iclouddrive/0H8if7EBB_qxo03mdVsmtu-hQ#u-boot-lzo-with-spl%5Ft20%5F64M Thank you very much ! I would like the SD-Card Image...
> Here you are. > > https://www.icloud.com/iclouddrive/0m5dK_4geRcueh9aKBY2ezBXQ#rootfs.ext2 > So I got the firmware running ! Thanks ! But I now find so many problems with it and I am wondering,...
The best method I found to get the ID is a follows: 1. Open the channel page 2. Start one video 3. Click on the channel icon below the video...
I don't use this module. I always work with the "built in" Get-ACL and Set-ACL. It is a bit more work, but I have experience gathered with it. But if...
Sadly I can't find the Xiaomi Mijia 2018 in the supported hardware list.
Same here. I renamed and labeled many sensors. So I have to do that all again !?! I would very much like a fix for anyone using this integration !
I always had issues with these boards when enabling Wifi. I think while sending via Wifi, the power delivery is insufficient and the chip has a "brown out" and resets....