CKlymko

I can also confirm this on 5ghz. For a while it seemed like it would only stick to the MACs in the blacklist, but then I noticed it was deauthing...

I'm trying out your fix tonight. But from your instructions it looks like I need to have this thing somehow already on a network. Until wireless (the only network interface)...

Ohhhh progress. OK, so I had to edit the file /etc/network/interfaces to change wlan0 from manual to auto and also this line :pre-up modprobe 8188eu I've got my network information...

That did it. It connected and pulled all the network information from my router and I can connect to the web interface. Your fork seems to work. Now I'll just...

I think this may be a foscam issue because I'm seeing very similar results with the F19826w with the hi3518cv100. I was able to downgrade the foscam firmware to a...

Ok. Unfortunately the cameras I need ipctool on are wireless only and I need to check and set some registers to try an enable the wireless adapter. The dm365 are...

   This is the board from the back half of the camera. The one that has the SoC on it as well as all the connections. These cameras...

If you edited the phishing scenario in the folder that was created when you downloaded this from github you'll need to re-run the install script again. Then it will put...