MirceaDan

I connected the scope to the AUX_CL and AUX_DA lines and i configured the 9250 in I2C master mode to read the magnetometer and all work fine and the I2C...

i can configure them from 50K to 910ohms, i tried this also, /available_pullstrength 2k 20k 50k 910ohms experiment: with external 1K pullup and bypass enabled between logic 0 and 1...

http://www.amazon.com/gp/product/B00OPNUO9U?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 and looking more careful i see it has 2 10K pull ups on the SDA/SCL lines (although i don't think those are the problem, once i have the new...

i wasted a lot of time on this and nothing, in the end i just drooped this and purchased https://www.bosch-sensortec.com/bst/products/all_products/bno055 for me exactly that was the problem the moment i...

> Spytest automation would you be able to share a link to "spytest automation" please