Bruce Fitzsimons

Try this for some inspiration, I'm working on a homeassistant forum post to go with it. This is working for my application. https://gist.github.com/Bwooce/7c43622dcc9bc1fbb04d7a0f1e5528df

Excellent, glad it was useful. Do something unexpected for someone and I'll call it even :-)

+1 to experiencing the problem but those logs were not helping me see the before vs after and failures. So I've just replicated it under debug myself, and I'll dig...

Ah, the entities are not being removed, and then HomeAssistant brings back zombie ones in restored state, and apparently that means they not set up again when setup is called...

I've been chasing down MAVlink corruption issues on ESP32, and this was part of it, and a frustrating one because the pattern was not immediately obvious. Let me know if...

I tried this a few months ago, and after booting with rpiboot and the recovery serial terminal discovered it didn't see the controller let alone the NVME, and so installing...

Sorry it took me a wee while to get back to this. I have successfully upgraded my Yellow with a CM5 so I thought I'd share. TLDR; Worked after replacing...

Thanks for your help @matthijskooijman > And I think it cannot have two sessions active on both bands at the same time, though, if that's what you need? Yes ideally...

Okay, so I've got this working and some advice from the TTN forum folk, so I thought I should write up a small design proposal before slogging on any further...

This is working now, I'll need to unpick it a bit to turn it into a series of commits. Do you want it here now, or as a delta on...