Brausmith
Brausmith
Today I followed [this Home Assistant project](https://community.home-assistant.io/t/desky-standing-desk-esphome-works-with-desky-uplift-jiecang-assmann-others/383790/18)'s instructions for my Desky (Australian) desk, using a D1 Mini. Everything appears to be working fine. However, it looks like this Upsy-Desky project...
The Fingerslide radius is considerably smaller than what is on the original, making it difficult for my sausage fingers to slide a component up the side. Could I please request...
When the Lip Style is set to either _none_ or _reduced_, it has an upturn at the ends which doesn't quite look right. It looks fine with the _normal_ Lip...
My understanding of KB design is still limited, but I understand that this design doesn't require diodes due to having sufficient pins on the controller board. Therefore, I imagine that...
Looks like the Chocorne Switch is missing a front mask for the Reset and OLED.
So far everything is running well across numerous different sensor types. But, my Contact sensors are reporting multiple times for each action, i.e. open or close. In addition to this,...