Bobby Martin
Bobby Martin
You might be able to help me with my current issue that is potentially related to this. I'm tracking power being pulled from the grid, power being generated by my...
Is that why none of us can get this working? We've got a newer version of the board this was written for?
I'm staring at this code trying to figure out how to make it do just that. I'm mostly unfamiliar with all of this, so most of what I'm trying results...
Oh... Yes, it definitely doesn't work on the Due as noted in Niall's video. I'm getting the same results as him. LPG on the Tesla forums also had the same...
The light on the BMB comes on only during power up, but that's it. If you're interested in troubleshooting (and I definitely am) we can chat elsewhere. I have Whatsapp,...
I finally got it to work, actually.
> Yes, the Tesla hardware runs at 5V but an Arduino Due or an ESP32 run at 3.3v instead. So you need a level shifter to go back and forth...
Well, Niall is getting more than me out of it. When I start up it tells me starting up and factory settings reset, but how do I actually retrieve any...
Disregard, I've got this all connected, powered up, and operating.,The boards just aren't being recognized by the Due for some reason. I've tried the tx/rx pins as well as the...
Signal pins are still outputting 3.54v Connected up to an FTDI board and ran the python script to see if I could dump literally anything from RX and it's just...