Benjamin
Benjamin
This makes me unable to use this mod on m1
Further, this only happens in case of a dedicated server on the server side
After checking again, it is already divided so it would be running at 120mhz still within spec, I have now opened a pull request https://github.com/arduino/ArduinoCore-mbed/pull/995 to change this
Had to do a small change, should be in a final form now though.
> Applied this PR to my GIGA and ran its SDRAM intensive workload for 90mins or so. Nil impact. I will continue running with these changes and report any issues...
I tried file in https://groups.google.com/g/fpga-wars-explorando-el-lado-libre/c/hbWVxvIWU_E/m/V2itMDZpAAAJ?pli=1 but no luck
For further information this happens no matter if the board is connected and I press the button or even if its fully disconnected
> hi! when do you buy your board? the month and year is important to check what firmware is in it. > > > > your machine is intel or...
> Thanks , could you help me to try to fix it? my tiny is prior to this and works fine, if you could give me feedback , we could...
> Hi @Bexin3 ! > > Ill put you three files here https://mega.nz/folder/jM9DlZhQ#7f9N9uniTnS3MHvS5mF3HQ > > * page1.txt and page2.txt are the missing metada in your fpgatiny. > * tinyprog a...