Bakunin-san

Initially I updated with the command `sudo bash installer.sh update` but the same happens if i first uninstall 3.2.5 and install 4.1.2 with `sudo bash installer.sh install` or if I...

Regarding opencv, interestingly enough on 3.2.5 I get these warning messages when running the configuration but I do not get them on 4.1.2 ``` [ WARN:[email protected]] global /build/opencv/src/opencv-4.6.0/modules/videoio/src/cap_gstreamer.cpp (2401) handleMessage...

/etc/linux-enable-ir-emitter/video2 is the result of the configuration with 3.2.5 but after installing 4.1.2 Configuration fails on 4.1.2 but if I tell it it passed successfully on the second attempt (same...

At the moment the IR emitter just works without anything installed, this has happened once before and it stops working again fairly quickly. I'll update with the yaml and video2...

video2 file from 3.2.5 config after 4.1.2 install: ``` device=/dev/video2 unit=10 selector=6 size=9 control0=1 control1=3 control2=2 control3=0 control4=0 control5=0 control6=0 control7=0 control8=0 ``` boot status after 4.1.2 install but before...

I'll boot a fedora liveusb tomorrow and see what that does, could also be something weird going on with my specific arch install.

Sorry for not updating, had a very busy few weeks. I tried v4.1.4 and configuration is now working, thank you so much! :)