Revit_Toolkit

Revit_Toolkit copied to clipboard

Add method for converting MeshElement from revit

1

### Issues addressed by this PR Adds method for converting any element to MeshElement from Revit ### Test files ### Changelog ### Additional comments

IsakNaslundBh

Add Ability to Modify Sheet Revisions

6

#### Description: @Hmullerjones requests the ability to add sheet revisions from GH to Revit

travispotterBH

I did not know the best place for this PR, or what was the best name of the branch, so I am prepared to remake this after comments. ### Issues...

travispotterBH

#### Description: As in the title, sometimes it is very helpful to be able to pull or push reference planes - would be a nice feature to add.

pawelbaran

#### Description: Spaces are currently pulled with only their external loop as their perimeter. This causes issues when we have spaces with internal loops that have other spaces within this...

enarhi

RefObjects do not capture the link information on FromRevit converts

2

#### Description: Currently `refObjects` on `FromRevit` converts use `ElementId` as key. This is not enough in case of linked models: in the extreme situation there could be objects of same...

pawelbaran

Revit_oM? : Revit Built-in Categories as Enum

2

#### Description: Per conversation with @pawelbaran it could be helpful for new users into the BHoM to be able to select the Revit category they wish to pull by a...

travispotterBH

Revit_Core_Engine: Diffing MEP elements failed due to location curve split

9

I noticed that diffing MEP elements such as ducts would often fail. This is because things like a duct will possibly be exported as multiple objects with the same Guid...

vietle-bh

#### Description: Selecting elements on the desired design options and/or phases often takes a lot of code, even more so if these elements reside in Revit links. It would be...

vietle-bh

Pipe diameter issue on pull

8

#### Description: On pull of pipes, the diameters seem to come out mismatched: 

pawelbaran