Drew

Hi - This one took me ages to figure why my existing code that uses the EEPROM broke as soon as I enabled the cache on ezTime. Looking at line...

### Describe the bug When creating a select box and configuring it with 'Listen for changes', there is no incoming connection. However, with 'Get Value' and 'Set Value', there is....

Can't detect i2c device

2

### The problem I have tried multiple different json settings but I can't seem to get my AS3935 lightning sensor to be detected by ESPHome. On Tasmota firmware it worked...

Unhandled Exception ZeDMD win10

6

Hi, First time using ZeDMD on a new build and trying to get it working and I am getting an error. The DMD boots and displays it's logo etc but...

Detection of VS2013 Ultimate

2

Hi, Thanks for your work. I recently tried to use your script to recover the key for VS2013 Ultimate but it does not detect it. I discovered the reg key...

Can you explain why the limitations with this FW

1

Hi, could you explain why this creates the limitations of no parasitic power supply and the need to replace relays with 5v ones. I am a bit confused why these...

GetAccessToken arguments

2

Hi, The latest update requires an 'oauth_verifier' paramater but the example you have left in the readme does not demonstrate how to use this - Can you please update the...

Help me understand Manifold pressure readings

32

Hi, I am trying to extract a reading for boost pressure from my car. In general, its working - I can connect, read PIDs ok but for some reason the...

6 years later... Thank you so much for this - I have been looking for an AT firmware for my ESP01 to be compatible with someone else's project that uses...