Aryo Zare

I did some searching. If I understood correctly the following line defines the channel indices later for sparisty, which then is probably used for showing them around the extremum channel...

Thanks Alessio for your feedback. no problem we're all super busy. By 'actual channel id' do you mean physical location of the channel on the probe ? And by 'index...

Hi @alejoe91 Regarding the units with related far apart channels this happens in all units. This is also somewhat visible in the trace view in phy in which all extracted...

Hi @alejoe91 Sorry for my delayed feedback. Please find attached 2 pdf files depicting the distal & proximal parts of the probe layout I use. [distal .pdf](https://github.com/SpikeInterface/spikeinterface/files/9280055/distal.pdf) [proximal .pdf](https://github.com/SpikeInterface/spikeinterface/files/9280057/proximal.pdf) Both...

I posted a relatively similar issue in the spike-interface page : https://github.com/SpikeInterface/spikeinterface/issues/1034

Hi @alejoe91 I just tested another recording session today & this problem disappeared ! Even though I used the exact syntax as before. I'll further contact you if I see...

You're welcome Alessio, Sure. Please find attached the cloud link for the files. https://ncloud.lin-magdeburg.de/s/QKTigdbPgRkifeG The main recording session is zipped and is inside a folder named 'recording'. It's about 3...

Thanks a lot Alessio for testing this. I reran the analysis on the same recording. This time I got an error. I sorted the recording again & extracted the waveforms....

also check https://github.com/SpikeInterface/spikeinterface/issues/895

@yger Continued from #1034 : I tested the MPI version on my LAB computer as you instructed. This compupter has windows operating system. > `Microsoft MPI , (10, 1, 0)`...