Arroquw
Arroquw
> Hey, remote diagnostics are difficult, but you're saying you didn't connect the audio lines to anything? My first try would be to terminate those, since they're going to pick...
When using the RUN from the DIN instead of 12v from cig lighter, are they just interchangeable in the PCB design? So instead of external 12v line you just connect...
Yeah that's it, like pop pop [higher pitched beep] pop pop [same beep] with the same intervals
Yes, I hear it always. If nothing is connected, I hear it. If I dont play any music, I hear it. https://github.com/Arroquw/123 here's a video of the sound
I tried the 4k7 resistors, no change at all. common return is not connected to GND either, I've tested that with a multimeter. There is also just the line from...
would a 10uF cap do anything useful on the audio common return or maybe L and r?
Is there a theory or explanation as to why the CSR fixes the noise?
working on my STM32 version first, will try to port the implementation of text once I get that working
Sending text as MD CHGR working on my stm32, just need to add bluetooth now. https://github.com/Arroquw/volvo_melbus_stm32
I ported my MD CHGR code to this project: https://github.com/visualapproach/Volvo-melbus/pull/33 Don't think the CSR bluetooth module has text/serial support though