Andy2No
Andy2No
I've got hold of a few Waveshare RP2040-Zero, and tried one with the NeoPixel example I first tried with the Adafruit ItsyBitsy RP2040: https://github.com/earlephilhower/arduino-pico/discussions/756 It's working fine with the Arduino...
@maxgerhardt I found my cheap pair of watch repair glasses, and used a little torch to light the Flash chip. I can't photograph it easily, but this is what I've...
@maxgerhardt My comments were intended to relate to this current issue, but I can't claim to fully understand what @HexRebuilt is saying is the problem. I use Arduino, and only...
I see :) No problem.
There's also a vertical jump shown from level 2 to level 3, if level 2 is below level 3 and level 3 rate is at around 50% or above -...
The vertical jump from level 2 to level 3 bug is also still there in v0.9.6 (stand-alone version) - I hadn't realised there was a 0.9.6, until today: ![envelopes graph...
> Solution found (this writeup is to help those who are struggling) > > tl;dr copy from a github of someone who uploaded all the software back in 2014 and...
Okay, I figured out how to get past that, to get Demo.elf to compile. I thought I'd write this here, before I forget. This was the error I was getting...
@christofmuc I think it would be consistent if you made that filter "Only Hidden", instead of "Also Hidden". I notice that if I tick Only Favourites and Only Untagged, it...
I got that partly wrong - it does an AND search.