Andrii Shpylovyi

That's great news! I will be tuned for it. @wanno-drijfhout in case if you will need some testing after all.

+1 Some news?

> I would like it to be possible as well, however this board is responsible for the low level operation needed to control the motor as well as the feedback...

Also have same issue on [https://www.funda.nl/zoeken/koop/?sort=%22date_down%22&exterior_space_type=%5B%22garden%22%5D&search_result=1&selected_area=%5B%22nl%22%5D](https://www.funda.nl/zoeken/koop/?sort=%22date_down%22&exterior_space_type=%5B%22garden%22%5D&search_result=1&selected_area=%5B%22nl%22%5D)

> Maybe my [comment here](https://github.com/9p4/jellyfin-plugin-sso/issues/182#issuecomment-2091400985) can help. It helped me. But as was mentioned in the linked topic - it's problems with Networking. I did some extra research and found...

I see. Maybe it will be useful for you: https://github.com/Nico0084/py-zwave-emulator As I understand - with this project you can emulate Z-Wave network without real devices.

Not at all. If you will needed in some real tests - you can notify me. Right now I have only 3 Z-Wave devices (Z-Stick Gen 5, Fibaro flood sensor...

auto_offset_z v0.0.5-0-g200a810b crowsnest v4.1.9-1-gd75a3aeb klipper v0.12.0-259-g34732f85 mainsail v2.11.2 mainsail-config v1.2.1-0-ge57810d5 moonraker v0.8.0-384-g8f3b30a0 sonar v0.1.3-1-geacc498a timelapse v0.0.1-143-gc7fff11e System OS-Packages

Maybe it will be possible to use this function from `probe` https://github.com/Klipper3d/klipper/blob/0087f04cc370cd542069940f0ed10c583de158ee/klippy/extras/probe.py#L488 instead of `self.printer.lookup_object('probe').run_probe(gcmd)`?