Ams-Laser

### Description Hello, i use gcode for embroidery, is it possible to have a step backwards button after a pause command is issued ? this would help positioning back the...

preview window not centered on work image

3

**Describe the bug** A clear and concise description of what the bug is. opening a gcode file that has x0y0 on center of work, gets cropped in preview window **To...

Help needed, color change macros

66

Hello, as far as i could understand (im new to python) the folloing code is where the color change comands go elif command == COLOR_CHANGE: write_string_utf8(f, "M00\n") now, if y...

Problem: Board reboots if $sd/list is issued after upload

10

### Controller Board MKS TinyBee V1.0 ### Machine Description Co2 Laser, but problem was detected using plain board, no drivers no conections, only SD card inserted ### Input Circuits ```yaml...

Embroidery mode

17

### Machine Context Im building a Embroidery machine, i currently use GRBL on it and the sender takes care of sending the G1 move lines one by one only on...

QUESTION? what sender is needed for embroidery mode?

14

what UI or sender shall be used for embroidery mode? Thanks

Loose laser movement sync on engraving

6

When doing highspeed (300mm/s) raster engraving syncronisation between laser pulses and movements is lost, resulting in ghosting and deformed output, had similar issue with FluidNc, fixed by using I2S_STATIC instead...

any way of supportin this version

Hello, im sure this is a electrical noise problem, but, does any one here know how to solve it ? the only problem is while external motor drivers are connected...

Can you add a step backwards function ?

3

need this function for embroidery, i woud be happy to compensate for your work, please contact me at Whatsapp+521 331 119 6406 Eduardo