AlpineWhite

@TerminatorSAW2k, open your config.toml file. It will likely be full of 'Null' after setting via GUI. Delete the contents and paste the example from the FlexASIO github. Save. FlexASIO GUI...

> > but does it still matter if quirk you shared fixes that? > > Well, the proposed quirk will only dim your device between 1-1000 (aprox). If your device...

AH, one other little issue. So fade on off action works. When set to none, the lights go out immediately. However, on_off_transition_time, and on_transition_time are both set to none, and...

As someone who owns only metric vehicles, metric machines, works with electronics, and mostly stocks metric fasteners because of ease.... This is an absolute godsend. Thank you. Manually merged and...

The 47.14mm dimension between mounts on the adapter plate is for a NEMA23 motor. Please note the actual radius of mounting holes for the NEMA24 StepperOnline motor is 50mm and...

I use the CL57**Y** so it may not be apples to apples. I set the uSteps to 1600, set tracking mode to enable (so the driver checks for lost steps...

I had it connect once on ORGB 0.6. Sadly subsequent restarts did not do the same. It may have to do with adding device definitions as the complete failure happened...

> Some fans will turn off with a 100% PWM signal. I think deepcool will treat 100% as 0. I can vouch that no corsair fan behaves that way and...