Alibloke
Alibloke
You can flash with a USB to TTL adapter by bridging G0 to ground
Some code changes will be needed to remove wifi and add ethernet: https://github.com/raomin/ESPAltherma/discussions/366
`# rpm-ostree status` `State: idle` `Deployments:` `* centos-atomic-host:centos-atomic-host/7/x86_64/standard` ` Version: 7.1802 (2018-03-01 23:16:30)` ` BaseCommit: 14d55f3a1de1d045fff87d4d1a42584bde9299be66766360352600fcb1c8e9f2` ` PendingBaseCommit: cbb9dbf9c8697e9254f481fff8f399d6808cecbed0fa6cc24e659d2f50e05a3e` ` PendingBaseVersion: 7.1803 (2018-04-03 12:35:38)` ` GPGSignature: Valid signature by 64E3E7558572B59A319452AAF17E745691BA8335`...
It appears to be, just not listed in the setup.h file explicitly: https://github.com/raomin/ESPAltherma/blob/main/include/def/ALTHERMA(EBLA-EDLA%20%20EWAA-EWYA%20D%20SERIES%209-16KW).h
OTA updates worked for me after I allowed access between vlans, perhaps that could be your issue?
@youmustcomply can you tell me which definition file you used with the unit? Was it ALTHERMA(LT_DA_04-08KW).h?
@youmustcomply Thanks! Slightly off topic, but I'm about to get the 8kW unit installed from Octopus in just under three weeks. How is it for you?
My MQTT broker requires empty username and empty password
This should close #381
@bgcngm that took some effort, but I think I did it