Alexander-r

I will look into adding tests. This was a rather recent addition so I have not checked how to use it. But right now on go 1.13.7 all the tests...

Would something like that be enough for a test? This is based on https://github.com/erincatto/box2d/blob/master/samples/tests/shape_cast.cpp but without actual drawing. My C++ version for comparing the output: https://gist.github.com/Alexander-r/937980a0bf7f04d8335db71f17b65d1d

Small update. This only happens on 5GHz network. On 2.4GHz network clients connect normally and receive "Connected" status right after connection.

On firmware 9.3.2.2 it takes longer to connect to 5Ghz network then to 2.4GHz but the phone stays connected. After connection I still get "Connected, no Internet" for about 10...

Right now I have LEDE r5892-26045049ba with mwlwifi a149180: ``` [ 0.000000] Linux version 4.9.76 (sr@sr-pc) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5892-26045049ba) ) #0 SMP Thu Jan 18 10:39:42...

Here is station dump for when my phone tries to connect: ``` Station c0:ee:fb:46:7a:24 (on wlan0) inactive time: 480 ms rx bytes: 2716 rx packets: 25 tx bytes: 1045 tx...

As I mentioned I did not notice this problems on 9.3.2.2 firmware for as long as the client could still connect to the network. And there are no problems with...

With option broadcast '1' set for client the client connects much faster and I don't see duplicate requests. But right after the phone connects it disconnects almost immediately and starts...

Only this client disconnects immediately. Sony Xperia X Performance (Android 7.0) does not disconnect from the network but it takes up to a minute after connection for it to go...

I've tried to check what is happening on the network when the phone tries to connect. On official firmware in bridge mode when the phone connects I see DHCP requests,...